top
Acualux Satine
IN MANY COLORS
WHERE TO FIND IT

Acualux Satine

Code 13092
  • High quality
  • High coverage
  • Intermixable colours

Delivery at your place

Order phone number 210 948 0035

High quality, high coverage permanent paint. To be directly used on wood, cardboard, plaster and other porous surfaces. Intermixable colours.

Finish: Satin
Colour (UNE 48073): White and colour range
Coverage: 12 - 16 m2/l
Drying at 23ºC 60 % RH (UNE 48301): 30 - 60 minutes
Recoat time at 23ºC 60% HR (UNE 48283): 6 - 8 hours
Fields of Application: Brush, roller and spray-gun.
Thinning: Water
Equipment Cleaning: Water
Application Temperature, RH<80%: +10ºC - +30ºC
Tinting: TITAN Universal Tinting Colours or Water Based Professional Dye
 

Carefully stir the contents in the pot. The surfaces to be painted have to be clean, dry and sound. Stains on fabric, wash before 5 minutes with water and detergent.

ATTENTION VERY IMPORTANT.
DO NOT APPLY: At temperatures below 7º C.
With relative humidity equalivent to or above 80%
If rain is foreseen in the next hours.

Failure to follow these instructions may lead to unsatisfactory results in the application, such as patches of different colour or irregular thin lines on areas of the paint film (similar to snail trails, etc..). Industrias TITAN will not accept any claim if these directions have not been taken into account. Please pay special attention to dark colours, as some of them are more susceptible to the occurrence of the phenomena mentioned above. This is an additional reason to observe the instructions and
precautions listed.

BARE SURFACES:
Bare canvas: Apply one or two coats of TITAN Gesso Universal Primer.
Plaster or wood: Apply a full coat of TITAN Sealing Primer or Acualux Gloss Varnish. The right thinning rate for the varnish is 1 part of varnish and 3 parts of water. Finish with one or two coats of Acualux TITAN.

Other surfaces : Seek advice.

MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
Wash, softly sand and directly apply Acualux TITAN.

MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
 If they are in poor condition, thoroughly remove them and proceed as on non prepared surfaces

  • DESCRIPTION

    High quality, high coverage permanent paint. To be directly used on wood, cardboard, plaster and other porous surfaces. Intermixable colours.

  • TECHNICAL INFO

    Finish: Satin
    Colour (UNE 48073): White and colour range
    Coverage: 12 - 16 m2/l
    Drying at 23ºC 60 % RH (UNE 48301): 30 - 60 minutes
    Recoat time at 23ºC 60% HR (UNE 48283): 6 - 8 hours
    Fields of Application: Brush, roller and spray-gun.
    Thinning: Water
    Equipment Cleaning: Water
    Application Temperature, RH<80%: +10ºC - +30ºC
    Tinting: TITAN Universal Tinting Colours or Water Based Professional Dye
     

  • NSTRUCTIONS FOR USE

    Carefully stir the contents in the pot. The surfaces to be painted have to be clean, dry and sound. Stains on fabric, wash before 5 minutes with water and detergent.

    ATTENTION VERY IMPORTANT.
    DO NOT APPLY: At temperatures below 7º C.
    With relative humidity equalivent to or above 80%
    If rain is foreseen in the next hours.

    Failure to follow these instructions may lead to unsatisfactory results in the application, such as patches of different colour or irregular thin lines on areas of the paint film (similar to snail trails, etc..). Industrias TITAN will not accept any claim if these directions have not been taken into account. Please pay special attention to dark colours, as some of them are more susceptible to the occurrence of the phenomena mentioned above. This is an additional reason to observe the instructions and
    precautions listed.

    BARE SURFACES:
    Bare canvas: Apply one or two coats of TITAN Gesso Universal Primer.
    Plaster or wood: Apply a full coat of TITAN Sealing Primer or Acualux Gloss Varnish. The right thinning rate for the varnish is 1 part of varnish and 3 parts of water. Finish with one or two coats of Acualux TITAN.

    Other surfaces : Seek advice.

    MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
    Wash, softly sand and directly apply Acualux TITAN.

    MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
     If they are in poor condition, thoroughly remove them and proceed as on non prepared surfaces

  • HOW TO'S

  • COLOR LIST

Acualux Satine

Related products

CONTACT US

ASK us something...

Fill out the form below with your contact information, type your question and press "send". We will respond as soon as possible.