M150 Thick Coat Epoxy Primer 2 Component TITAN YATE
- Especially for submerged surfaces
Delivery at your place
Order phone number 210 008 5999
Especially formulated as a preventive treatment against Osmosis. Thick coat rust- preventive primer to be applied on iron and aluminium. Especially for submerged surfaces.
Fields of Application
Submerged surfaces or in marine environments, where a high coat thickness is required. Surfaces have to be previously primed with TITAN YATE Anticorrosive Epoxy Primer.
DRYING:8 hours
APPLICATION METHODS: Brush, roller or spray-gun.
Finish:Semi gloss
GENERAL REMARKS:
Carefully stir the contents in the pack before use. The surfaces to be painted have to be clean, dry and degreased.
BARE SURFACES:
Polyester: For osmosis treatment, remove the gel-coat. Confer roughness to the surface, rinse with fresh water and let to thoroughly dry. Apply 1 coat of M150 TITAN YATE Epoxy Primer (thick coat), thinned with 15% TITAN YATE Thinner. Let to dry for 24 hours. Fill if necessary with TITAN YATE Epoxy Filler. Finish with 3 - 4 coats of M150 Thick Coat Epoxy Primer.
Iron And Aluminium: Remove rust and apply 1 coat of TITAN YATE Epoxy Primer. After 24 hours, apply 3 coats of M150 TITAN YATE Epoxy Primer (thick coat). If more than 3 days elapse, sanding is always required
MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
Thoroughly remove previous coats with TITAN Plus Paint Stripper. Wash with fresh water and proceed as for bare surfaces. In case of polyester surfaces, do not apply TITAN Plus Paint Stripper but remove old coat by using a mechanical procedure.
-
DESCRIPTION
Especially formulated as a preventive treatment against Osmosis. Thick coat rust- preventive primer to be applied on iron and aluminium. Especially for submerged surfaces.
Fields of Application
Submerged surfaces or in marine environments, where a high coat thickness is required. Surfaces have to be previously primed with TITAN YATE Anticorrosive Epoxy Primer. -
TECHNICAL INFO
DRYING:8 hours
APPLICATION METHODS: Brush, roller or spray-gun.
Finish:Semi gloss -
NSTRUCTIONS FOR USE
GENERAL REMARKS:
Carefully stir the contents in the pack before use. The surfaces to be painted have to be clean, dry and degreased.BARE SURFACES:
Polyester: For osmosis treatment, remove the gel-coat. Confer roughness to the surface, rinse with fresh water and let to thoroughly dry. Apply 1 coat of M150 TITAN YATE Epoxy Primer (thick coat), thinned with 15% TITAN YATE Thinner. Let to dry for 24 hours. Fill if necessary with TITAN YATE Epoxy Filler. Finish with 3 - 4 coats of M150 Thick Coat Epoxy Primer.
Iron And Aluminium: Remove rust and apply 1 coat of TITAN YATE Epoxy Primer. After 24 hours, apply 3 coats of M150 TITAN YATE Epoxy Primer (thick coat). If more than 3 days elapse, sanding is always required
MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
Thoroughly remove previous coats with TITAN Plus Paint Stripper. Wash with fresh water and proceed as for bare surfaces. In case of polyester surfaces, do not apply TITAN Plus Paint Stripper but remove old coat by using a mechanical procedure. - HOW TO'S
- COLOR LIST