top
Anticorrosive paint Hammered Effect Oxiron Martele TITAN
10 YEARS PROTECTION WHERE TO FIND IT

Anticorrosive paint Hammered Effect Oxiron Martele TITAN

Code 12992
  • Quick drying rustproof enamel-paint
  • Direct application on steel, no primer is needed
  • It provides up 10 years weathering resistance and a high gloss hammered finish
  • High adhesion
  • Hardwearing
  • Resistant to impact and scratches.

Delivery at your place

Order phone number 210 948 0035

Oxiron Martele by Titan is an anticorrosive paint with hammered effect. It is suitable for application directly to metal surfaces without primer. It offers excellent adhesion and ensures 10 years surface protection.Waterproof - Repels water and dirt. Quick drying. High resistance to corrosive environment, stains, frequent use. 

Oxiron Martele provides effective protection against corrosion as well as a highly decorative effect on interior and exterior surfaces, ie metal railings, handrails, machines, garden furniture, elevator doors, garage doors. Can be used on wooden surfaces properly prepared.

The use of Hammered OXIRON allows to save time because overcoating is possible after one1 hour and, in this way, most paint works can be finished in one single day.

Finish: Gloss metallic
Colours: White and 10 more apchroseis
Coverage: 8-12 sq.m./L
Drying time: 15-30 min
Recoat: 1-6 hours or after 7 days
Application tool: Brush, roller or spray gun
Dilution / Cleaning equipment: TITAN Diluyente MR
Packsize: 375ml, 750ml and 4L 

GENERAL REMARKS:
Thoroughly stir the contents in the can before and while using. The surfaces to be painted have to be dry and free from any dirt, grease, poorly adhered rust particles and low quality old paints. It is important to keep the overcoating time if a high quality finish is required. Every following coat has to be applied by the next 6 hours. If this time is exceeded, wait 7 days. If overcoating after 6 hours, the applied surface may show creasing. In case of application by spray-gun, the following coats can be applied after 15 - 30 minutes. The hammered pattern will depend on the coat thickness and on the way the paint is applied.

BARE SURFACES:

Steel or Iron: It can be directly applied. No primer needed. If the surface shows rust, lightly sand in order to roughen the surface. Remove poorly adhered rust. In environments with medium-high corrosion, steel has to be sanded up to ST-3 of the UNE EN ISO 8501-1 standard. Under these conditions, a minimum thickness of 140 microns (3 dry coats) will be required. Zinc, tin, galvanized: surfaces: Sand to matt and apply TITAN Multi-Purpose Primer.

Wood: TITAN Protector, TITAN Sealing Primer or TITAN Multi-Purpose Primer.

MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
Wash with soapy water, let to dry, lightly sand and directly apply Hammered OXIRON.
MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
Thoroughly remove rust and poorly adhered previous coats by means of sandpaper or a metallic brush. For topcoats, proceed
as for bare surfaces.
 

  • DESCRIPTION

    Oxiron Martele by Titan is an anticorrosive paint with hammered effect. It is suitable for application directly to metal surfaces without primer. It offers excellent adhesion and ensures 10 years surface protection.Waterproof - Repels water and dirt. Quick drying. High resistance to corrosive environment, stains, frequent use. 

    Oxiron Martele provides effective protection against corrosion as well as a highly decorative effect on interior and exterior surfaces, ie metal railings, handrails, machines, garden furniture, elevator doors, garage doors. Can be used on wooden surfaces properly prepared.

    The use of Hammered OXIRON allows to save time because overcoating is possible after one1 hour and, in this way, most paint works can be finished in one single day.

  • TECHNICAL INFO

    Finish: Gloss metallic
    Colours: White and 10 more apchroseis
    Coverage: 8-12 sq.m./L
    Drying time: 15-30 min
    Recoat: 1-6 hours or after 7 days
    Application tool: Brush, roller or spray gun
    Dilution / Cleaning equipment: TITAN Diluyente MR
    Packsize: 375ml, 750ml and 4L 

  • NSTRUCTIONS FOR USE

    GENERAL REMARKS:
    Thoroughly stir the contents in the can before and while using. The surfaces to be painted have to be dry and free from any dirt, grease, poorly adhered rust particles and low quality old paints. It is important to keep the overcoating time if a high quality finish is required. Every following coat has to be applied by the next 6 hours. If this time is exceeded, wait 7 days. If overcoating after 6 hours, the applied surface may show creasing. In case of application by spray-gun, the following coats can be applied after 15 - 30 minutes. The hammered pattern will depend on the coat thickness and on the way the paint is applied.

    BARE SURFACES:

    Steel or Iron: It can be directly applied. No primer needed. If the surface shows rust, lightly sand in order to roughen the surface. Remove poorly adhered rust. In environments with medium-high corrosion, steel has to be sanded up to ST-3 of the UNE EN ISO 8501-1 standard. Under these conditions, a minimum thickness of 140 microns (3 dry coats) will be required. Zinc, tin, galvanized: surfaces: Sand to matt and apply TITAN Multi-Purpose Primer.

    Wood: TITAN Protector, TITAN Sealing Primer or TITAN Multi-Purpose Primer.

    MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
    Wash with soapy water, let to dry, lightly sand and directly apply Hammered OXIRON.
    MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
    Thoroughly remove rust and poorly adhered previous coats by means of sandpaper or a metallic brush. For topcoats, proceed
    as for bare surfaces.
     

  • HOW TO'S

  • COLOR LIST

Related products

CONTACT US

ASK us something...

Fill out the form below with your contact information, type your question and press "send". We will respond as soon as possible.