top

Iron Oxide Epoxy Primer 838 TITAN

Code 1416866
  • Rust-preventive multi-purpose primer for different kinds of metallic structures

Delivery at your place

Order phone number 210 948 0035

 Two pack epoxy-polyamide primer. High performance concerning hardness, toughness and adhesion on several types of surfaces.

 

 

DRYING:4 - 5 hours
APPLICATION METHODS: Brush (Just patch ), Air Spray-Gun and Airless (The data quoted are only hints)
Finish:Matt

GENERAL REMARKS:
Carefully stir the product in the pack, preferably with a mechanical shaker. The surfaces to be painted have to be clean, dry and sound. Let the mixture to dry for 15 minutes before using it in order to help to remove air. If exceeding the maximum overcoating limit, to ensure the maximum adhesion between coats a light blasting is required. (Sand Sweeping), to confer a light roughness to the primed surface.

BARE SURFACES:
Steel: Remove rust by sandblasting up to Sa 2 ½ grade of the ISO 8501-1 standard or by means of manual or mechanical cleaning, up to ST3 grade of this same standard. Degrease, dust off and remove rests of rust. Apply the required number of coatings to reach the recommended thickness level. Finish with the topcoats according to requirements. In C3 or even tougher environments (according to ISO 12944), apply 831 Epoxy Primer instead of 838 Iron Oxide Epoxy Primer.

Galvanised steel or non-ferrous metals: Carefully clean and degrease before applying one coat of this primer. Depending on the galvanised surface type, it will be necessary to open pores.

Other surfaces. Seek advice.

MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:

For poorly adhered systems and/or showing rust, remove them by sandblasting up to Sa 2 ½ grade of the ISO 8501-2 standard or by means of manual or mechanical cleaning, up to ST3 grade of this same standard. Patch with this primer, preferably by brush. Apply a full coat of this primer and then the finishing product, according to specifications. If there is a large poorly adhered surface, thoroughly remove old coats and proceed as for bare surfaces

  • DESCRIPTION

     Two pack epoxy-polyamide primer. High performance concerning hardness, toughness and adhesion on several types of surfaces.

     

     

  • TECHNICAL INFO

    DRYING:4 - 5 hours
    APPLICATION METHODS: Brush (Just patch ), Air Spray-Gun and Airless (The data quoted are only hints)
    Finish:Matt

  • NSTRUCTIONS FOR USE

    GENERAL REMARKS:
    Carefully stir the product in the pack, preferably with a mechanical shaker. The surfaces to be painted have to be clean, dry and sound. Let the mixture to dry for 15 minutes before using it in order to help to remove air. If exceeding the maximum overcoating limit, to ensure the maximum adhesion between coats a light blasting is required. (Sand Sweeping), to confer a light roughness to the primed surface.

    BARE SURFACES:
    Steel: Remove rust by sandblasting up to Sa 2 ½ grade of the ISO 8501-1 standard or by means of manual or mechanical cleaning, up to ST3 grade of this same standard. Degrease, dust off and remove rests of rust. Apply the required number of coatings to reach the recommended thickness level. Finish with the topcoats according to requirements. In C3 or even tougher environments (according to ISO 12944), apply 831 Epoxy Primer instead of 838 Iron Oxide Epoxy Primer.

    Galvanised steel or non-ferrous metals: Carefully clean and degrease before applying one coat of this primer. Depending on the galvanised surface type, it will be necessary to open pores.

    Other surfaces. Seek advice.

    MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:

    For poorly adhered systems and/or showing rust, remove them by sandblasting up to Sa 2 ½ grade of the ISO 8501-2 standard or by means of manual or mechanical cleaning, up to ST3 grade of this same standard. Patch with this primer, preferably by brush. Apply a full coat of this primer and then the finishing product, according to specifications. If there is a large poorly adhered surface, thoroughly remove old coats and proceed as for bare surfaces

  • HOW TO'S

  • COLOR LIST

Related products

CONTACT US

ASK us something...

Fill out the form below with your contact information, type your question and press "send". We will respond as soon as possible.