top
TITAN Unilak Universal Enamel Satin
IN MANY COLORS
WHERE TO FIND IT

TITAN Unilak Universal Enamel Satin

Code 12044
  • Water-soluble
  • Elastic
  • Very easy application on any kind of surface
  • Suitable for any kind and shape of materials

Delivery at your place

Order phone number 210 948 0035

Satin finish high adhesion enamel. Water-soluble. Elastic. Very easy application on any kind of surface. Suitable for any kind and shape of materials. Once applied, it makes a protective and moist self-controlling film. Good obliteration and wearing resistance. It contains anti-mould preservative.
It adheres to wood, cork, galvanised iron, zinc, primed steel, copper, tin, lead, iron, fibro-cement, brick, stone, concrete, plaster, roughcast, porous tile, expanded polystyrene, hard PVC, methacrylate, synthetic fibre, cotton, canvas fabric, etc. In view of the wide variety of possible surfaces, a previous test is recommended.

Fields of Application
Very suitable to paint walls and kitchen and bathroom doors, indoor furniture and outdoor PVC furniture, PVC indoor and outdoor pipes, indoor and outdoor suitably primed steel structures, galvanized doors.

 

DRYING:1 - 2 hours
APPLICATION METHODS: Brush, roller and spray-gun
PRESENTATION:4 l, 750 and 375 ml
FINISH:Satin

 

Coverage 8 - 12 m2/l
Recoat time at 23ºC 60% HR: 6 - 12 hours
Fields of Application:  Brush, roller and spray-gun
Thinner: Water
Tinting: TITAN Universal Tinting Colours or Professional Water-based Dye

GENERAL REMARKS:
Thoroughly stir the contents in the pack. The surfaces to be painted have to be clean, dry and suitably primed. Remove all existing rests of dirt, grease, poorly adhered rust and previous coatings by using thinner or paint stripper, depending on requirements.

BARE SURFACES:
Wood: Sand following the wood grain, thoroughly clean the surface, remove all resins or resin secretion and smooth up sharp edges. Apply a base-coat of TITANXYL Water Based Lasur Undercoat or TITAN Sealing-Primer depending on requirements.

Iron: TITAN Water Based Multi Purpose Primer. For outdoor surfaces, at least two coats of primer will be needed. For indoor surfaces, one coat will be enough.

Porous tile, hard PVC, expanded polystyrene, methacrylate, copper, tin and cork: Directly apply one or two coats of UNILAK

In all cases for:
Indoor surfaces: Finish with 1 or 2 full coats of UNILAK Enamel. Avoid excess brushing or rolling.
Outdoor surfaces: Finish with 2 or 3 coats of UNILAK Enamel. Avoid excess brushing or rolling.
MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
Wash, lightly sand and directly apply 1 or 2 coats of UNILAK.
MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
Completely remove all previous coats and proceed as for bare surfaces.

 

  • DESCRIPTION

    Satin finish high adhesion enamel. Water-soluble. Elastic. Very easy application on any kind of surface. Suitable for any kind and shape of materials. Once applied, it makes a protective and moist self-controlling film. Good obliteration and wearing resistance. It contains anti-mould preservative.
    It adheres to wood, cork, galvanised iron, zinc, primed steel, copper, tin, lead, iron, fibro-cement, brick, stone, concrete, plaster, roughcast, porous tile, expanded polystyrene, hard PVC, methacrylate, synthetic fibre, cotton, canvas fabric, etc. In view of the wide variety of possible surfaces, a previous test is recommended.

    Fields of Application
    Very suitable to paint walls and kitchen and bathroom doors, indoor furniture and outdoor PVC furniture, PVC indoor and outdoor pipes, indoor and outdoor suitably primed steel structures, galvanized doors.

     

  • TECHNICAL INFO

    DRYING:1 - 2 hours
    APPLICATION METHODS: Brush, roller and spray-gun
    PRESENTATION:4 l, 750 and 375 ml
    FINISH:Satin

     

  • NSTRUCTIONS FOR USE

    Coverage 8 - 12 m2/l
    Recoat time at 23ºC 60% HR: 6 - 12 hours
    Fields of Application:  Brush, roller and spray-gun
    Thinner: Water
    Tinting: TITAN Universal Tinting Colours or Professional Water-based Dye

    GENERAL REMARKS:
    Thoroughly stir the contents in the pack. The surfaces to be painted have to be clean, dry and suitably primed. Remove all existing rests of dirt, grease, poorly adhered rust and previous coatings by using thinner or paint stripper, depending on requirements.

    BARE SURFACES:
    Wood: Sand following the wood grain, thoroughly clean the surface, remove all resins or resin secretion and smooth up sharp edges. Apply a base-coat of TITANXYL Water Based Lasur Undercoat or TITAN Sealing-Primer depending on requirements.

    Iron: TITAN Water Based Multi Purpose Primer. For outdoor surfaces, at least two coats of primer will be needed. For indoor surfaces, one coat will be enough.

    Porous tile, hard PVC, expanded polystyrene, methacrylate, copper, tin and cork: Directly apply one or two coats of UNILAK

    In all cases for:
    Indoor surfaces: Finish with 1 or 2 full coats of UNILAK Enamel. Avoid excess brushing or rolling.
    Outdoor surfaces: Finish with 2 or 3 coats of UNILAK Enamel. Avoid excess brushing or rolling.
    MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
    Wash, lightly sand and directly apply 1 or 2 coats of UNILAK.
    MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
    Completely remove all previous coats and proceed as for bare surfaces.

     

  • HOW TO'S

  • COLOR LIST

TITAN Unilak Universal Enamel Satin

D.I.Y. VIDEOS

Related products

CONTACT US

ASK us something...

Fill out the form below with your contact information, type your question and press "send". We will respond as soon as possible.