Pro-Netic magnetic chalkboard paint is a dual purpose coating that can produce a surface to which magnets will attach and is also suitable as a chalkboard. Pro-Netic can create a magnetic notice board on suitably prepared wall areas, wooden board, MDF or plasterboard. 

Colour: Black
Finish: Matt
Touch Dry: 30 mins at 20C
Hard Dry: 2 hours at 20C
Full Hardness: 5 - 7 days at 20C
Recoatable after 3 hours
Cleaner / Thinner: Water

Application
Ensure all surfaces are clean, dry and free from grease, oil and any other contaminates. Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate key is produced. Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly. Mix well before use. As dictated by normal good painting practice. In confined spaces, provide adequate ventilation during application and drying. Do not paint when temperature will be at or below 7°C during the painting and drying process. Apply direct on to walls and wood. On non ferrous metal use Coo-Var W201 All Metals Primer. Apply a minimum of 3 coats by brush. Do not paint when temperature will be at or below 7°C during the painting and drying process.

For use as a chalkboard: To prime your chalkboard, lay a piece of chalk on its side and cover the entire board liberally with chalk. Rub it in with a dry rag and then erase. Chalkboards are porous, so if you do not prime there is a risk the first markings will be there permanently.