Polyester Filler 2 Components TITAN YATE
- Especially suitable for quick works
- Excellent adhesion on metal sheet
- High refilling and levelling power
- Thixotropic
Delivery at your place
Order phone number 210 008 5999
Polyester filler. Especially suitable for quick works. Excellent adhesion on metal sheet. High refilling and levelling power. Thixotropic. Easy application in areas that are hard to reach.
Fields of Application
To even and refill irregularities of the surfaces to be painted, both metallic or made of polyester. Especially suitable for super- structures.
DRYING:5 - 10 minutes
APPLICATION METHODS: Putty knife
Finish:Matt
The surfaces have to be sanded, clean, dry and salt-free (previously wash them). Do not use the filler in direct sunlight or with dew. Only when going to be used, mix the required amount of Filler with 2 - 3% Hardener. Apply the mixture immediately (application must be made within 5 - 8 minutes, depending on amount and room temperature). It is advisable to dry sand polyester filler because moisture inside the filler while watersanding may cause problems in the surface and in the finish.
Do not apply on thermoplastic finishes and Wash Primer.
BARE SURFACES:
Apply with putty knife. It may be overcoated after 30 minutes with prior sanding.
MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
Clean and sand the surface. Directly apply the filler with a putty-knife.
MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
Thoroughly remove previous coats and proceed as for bare surfaces.
-
DESCRIPTION
Polyester filler. Especially suitable for quick works. Excellent adhesion on metal sheet. High refilling and levelling power. Thixotropic. Easy application in areas that are hard to reach.
Fields of Application
To even and refill irregularities of the surfaces to be painted, both metallic or made of polyester. Especially suitable for super- structures. -
TECHNICAL INFO
DRYING:5 - 10 minutes
APPLICATION METHODS: Putty knife
Finish:Matt -
NSTRUCTIONS FOR USE
The surfaces have to be sanded, clean, dry and salt-free (previously wash them). Do not use the filler in direct sunlight or with dew. Only when going to be used, mix the required amount of Filler with 2 - 3% Hardener. Apply the mixture immediately (application must be made within 5 - 8 minutes, depending on amount and room temperature). It is advisable to dry sand polyester filler because moisture inside the filler while watersanding may cause problems in the surface and in the finish.
Do not apply on thermoplastic finishes and Wash Primer.
BARE SURFACES:
Apply with putty knife. It may be overcoated after 30 minutes with prior sanding.MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
Clean and sand the surface. Directly apply the filler with a putty-knife.
MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
Thoroughly remove previous coats and proceed as for bare surfaces. - HOW TO'S
- COLOR LIST