Primer with good penetration and adhesion. Easy sanding. Suitable primer for porous non-alkalyne surfaces (plaster, etc.) as well as for wood. It seals surfaces and provides the right and uniform texture, porosity and absorption for the final coats.

 

DRYING:2 - 4 hours
APPLICATION METHODS: Brush and roller
Finish:Matt

GENERAL REMARKS:
Thoroughly stir the contents in the pack. The surfaces have to be clean, dry and suitably prepared.

BARE SURFACES:

Wood: Sand the wood following the wood grain. Clean the surface, remove resin or resin secretion and smooth too sharp edges. Apply 1 coat of D12 Imprimol Sealer. Sand and dust off. Apply a second coat of D12 Imprimol Sealer to obtain a smooth surface. Lightly sand. Apply the finishing product. Outdoors: Previously protect wood with TITAN Protector or TITANXYL Total Protection 3 depending on needs.

Porous non-alkaline surfaces (plaster, etc.): Directly apply D12 Imprimol Sealer. If the surface is unsound, apply a previous coat of D13 Fixative. For coloured top coats, the sealer can be tinted with TITAN Universal Tinting Colours. In this case, a single coat of finishing product will be enough. Between 12 - 24 hours, repair the damages on the surface with synthetic fillers. Patch with D12 Imprimol Sealer. Let to thoroughly dry (24-48 hours) before applying the finishing product.

MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
Remove unsound previous paint coats and proceed as for bare surfaces.