top

Water based Sealing Primer A18 TITAN

Code 11172
  • Good impregnation and adherence
  • Tannin blocker
  • Easy application and sanding
  • Low odour

Delivery at your place

Order phone number 210 948 0035

White water-based primer for porous surfaces (plaster, wood). Good impregnation and adherence. It seals the surfaces and prevents irregular absorption when applying top coats. Tannin blocker. Easy application and sanding. Low odour.

 

DRYING:2 - 3 hours
APPLICATION METHODS: Brush, roller and spray-gun.
 

GENERAL REMARKS:
Carefully stir in the contents in the pack. Clean the surfaces to be painted. Remove dust or poorly adhered paint.

ATTENTION.
VERY IMPORTANT.
DO NOT APPLY:
At temperatures below 7 ºC.With relative humidity equal or superior to 80%.If rain is foreseen in the next hours.Failure to follow these instructions may lead to unsatisfactory results in the application, such as patches of different colour or irregular thin lines on areas of the paint film (similar to snail trails, etc.). Industrias TITAN will not accept any claim if these directions have not been taken into account. Please pay special attention to dark colours, as some of them are more susceptible to the occurrence of the phenomena mentioned above. This is an additional reason to observe the instructions and precautions listed.

BARE SURFACES:
Plaster:
Once the surfaces are smooth (sanded), clean and dry, directly apply A18 Water based Sealing Primer. If a colour finish is required, tint the primer with TITAN Universal Tinting Colours. In most cases a single coat of finish product is enough Unsound plaster: Apply a coat of A16 Fixative before the A18 Water-based Sealing Primer.

Wood: Directly apply the Water based Sealing Primer. Do not thin. It provides easy sanding by avoiding the pickup roughness which is typical of very soft and porous woods. Before applying the Sealing Primer, protect wood from moist, mould and rot by previously treating them with TITANXYL Total Protection 3.

MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
Thoroughly remove all previous coats. Then proceed as on bare surfaces.
 

  • DESCRIPTION

    White water-based primer for porous surfaces (plaster, wood). Good impregnation and adherence. It seals the surfaces and prevents irregular absorption when applying top coats. Tannin blocker. Easy application and sanding. Low odour.

     

  • TECHNICAL INFO

    DRYING:2 - 3 hours
    APPLICATION METHODS: Brush, roller and spray-gun.
     

  • NSTRUCTIONS FOR USE

    GENERAL REMARKS:
    Carefully stir in the contents in the pack. Clean the surfaces to be painted. Remove dust or poorly adhered paint.

    ATTENTION.
    VERY IMPORTANT.
    DO NOT APPLY:
    At temperatures below 7 ºC.With relative humidity equal or superior to 80%.If rain is foreseen in the next hours.Failure to follow these instructions may lead to unsatisfactory results in the application, such as patches of different colour or irregular thin lines on areas of the paint film (similar to snail trails, etc.). Industrias TITAN will not accept any claim if these directions have not been taken into account. Please pay special attention to dark colours, as some of them are more susceptible to the occurrence of the phenomena mentioned above. This is an additional reason to observe the instructions and precautions listed.

    BARE SURFACES:
    Plaster:
    Once the surfaces are smooth (sanded), clean and dry, directly apply A18 Water based Sealing Primer. If a colour finish is required, tint the primer with TITAN Universal Tinting Colours. In most cases a single coat of finish product is enough Unsound plaster: Apply a coat of A16 Fixative before the A18 Water-based Sealing Primer.

    Wood: Directly apply the Water based Sealing Primer. Do not thin. It provides easy sanding by avoiding the pickup roughness which is typical of very soft and porous woods. Before applying the Sealing Primer, protect wood from moist, mould and rot by previously treating them with TITANXYL Total Protection 3.

    MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
    Thoroughly remove all previous coats. Then proceed as on bare surfaces.
     

  • HOW TO'S

  • COLOR LIST

Related products

CONTACT US

ASK us something...

Fill out the form below with your contact information, type your question and press "send". We will respond as soon as possible.