top

Titanlux Synthetic Wood Varnish Matt TITAN

Code 12103
  • Based on a high solid technology
  • Quick drying
  • Exceptional transparency
  • High elasticity
  • High wear and wash resistance
  • Very low odour

 

Delivery at your place

Order phone number 210 948 0035

Alkyd varnish matt wood with high quality solids. Quick drying and extremely clear, is very resistant to sunlight and frequent washing.Does not alter the natural look of woodSuitable for decoration and protection of all natural or painted wood species indoors: furniture and doors, and outside, where it is exposed directly to the weather.

Fields of Application
For the decoration and protection of all kinds of natural or stained wood structures.
Indoors: furniture, doors, panelling, etc.
Outdoors: surfaces protected from direct exposure to the weather: balconies ceilings, pergolas, eaves, canopies, etc.

DRYING:3 - 5 hours
APPLICATION METHODS: Brush, roller and spray-gun
Finish:Matt or waxed

Thoroughly stir the contents in the pack. The surfaces have to be clean, dry and suitably prepared.
The wood moisture content must not exceed 12% in hard wood and 15% in soft wood.
Tropical or resinous wood:
 Please refer to the Technical Service.
BARE SURFACES:
Sand the wood following the wood grain. Clean the surface, remove resin or resin secretion and smooth too sharp edges. Apply
a base coat of TITANLUX Gloss Synthetic Varnish. After that apply a first coat of TITANLUX Watt Synthetic Varnish. Let to
thoroughly dry. Softy sand with very fine sandpaper (no. 360) and apply a second final coat.

Waxed polish finish:
 One the TITANLUX Matt Synthetic Varnish is dry (2 - 3 days) the waxed appearance can be obtained by
softly rubbing the surface with a dry and clean scourer.
MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
Wash, lightly sand and directly apply.
MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
Remove previous varnish coats and proceed as for unvarnished wood.

  • DESCRIPTION

    Alkyd varnish matt wood with high quality solids. Quick drying and extremely clear, is very resistant to sunlight and frequent washing.Does not alter the natural look of woodSuitable for decoration and protection of all natural or painted wood species indoors: furniture and doors, and outside, where it is exposed directly to the weather.

    Fields of Application
    For the decoration and protection of all kinds of natural or stained wood structures.
    Indoors: furniture, doors, panelling, etc.
    Outdoors: surfaces protected from direct exposure to the weather: balconies ceilings, pergolas, eaves, canopies, etc.

  • TECHNICAL INFO

    DRYING:3 - 5 hours
    APPLICATION METHODS: Brush, roller and spray-gun
    Finish:Matt or waxed

  • NSTRUCTIONS FOR USE

    Thoroughly stir the contents in the pack. The surfaces have to be clean, dry and suitably prepared.
    The wood moisture content must not exceed 12% in hard wood and 15% in soft wood.
    Tropical or resinous wood:
     Please refer to the Technical Service.
    BARE SURFACES:
    Sand the wood following the wood grain. Clean the surface, remove resin or resin secretion and smooth too sharp edges. Apply
    a base coat of TITANLUX Gloss Synthetic Varnish. After that apply a first coat of TITANLUX Watt Synthetic Varnish. Let to
    thoroughly dry. Softy sand with very fine sandpaper (no. 360) and apply a second final coat.

    Waxed polish finish:
     One the TITANLUX Matt Synthetic Varnish is dry (2 - 3 days) the waxed appearance can be obtained by
    softly rubbing the surface with a dry and clean scourer.
    MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
    Wash, lightly sand and directly apply.
    MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
    Remove previous varnish coats and proceed as for unvarnished wood.

  • HOW TO'S

  • COLOR LIST

Related products

CONTACT US

ASK us something...

Fill out the form below with your contact information, type your question and press "send". We will respond as soon as possible.