top

Polyurethane + Acrylic Varnish TITAN YATE

Code 54107
  • UV filters
  • Resistant to the action of chemical agents
  • Hard-wearing
  • High elasticity
  • Gloss retention
  • High resistance to wear and washes
  • Non-yellowing

Delivery at your place

Order phone number 210 008 5999

Two-component gloss varnish, formulated with acrylic polyol with a high cross-linking degree and aliphatic isocyanate with UV filters. Resistant to the action of chemical agents, such as grease, petrol and gas-oil, especially in marine environments. Hard-wearing. High elasticity. Gloss retention. High resistance to wear and washes. Non-yellowing.

Fields of Application
In- and outdoor use, for the protection of wooden surfaces such as teak, pinewood or fibreboard, in marine environments and over the waterline

DRYING:3 - 4 hours
APPLICATION METHODS: Air Spray-gun, Roller, Brush
Finish:Gloss

The surface has to be sanded, clean, dry and free from salt (wash it). Do not varnish either with direct sunlight or with dew.

BARE SURFACES: Thin the first coat with 20 - 30% TITAN YATE Thinner.

Hard wood, teak, iroko, or tropical wood: Thoroughly wash the surface with TITAN YATE Thinner (to remove resin).Wait 24 hours to see if there is any resin exudation or delay in the varnish drying. If this is the case, wash again with TITAN YATE Thinner.

Sand between coats. Finish with 2 - 3 unthinned coats of TITAN YATE Polyurethane Varnish.

MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
Thoroughly remove old varnish in poor condition. Sand to matt old but well adhered varnish and apply 2 - 3 unthinned coats of TITAN YATE Polyurethane + Acrylic Varnish.

MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
Thoroughly remove old varnish in poor condition by sanding, brushing or with TITAN Plus Paint-Stripper until obtaining a wooden surface in good condition. After that, proceed as for non-prepared surfaces.

  • DESCRIPTION

    Two-component gloss varnish, formulated with acrylic polyol with a high cross-linking degree and aliphatic isocyanate with UV filters. Resistant to the action of chemical agents, such as grease, petrol and gas-oil, especially in marine environments. Hard-wearing. High elasticity. Gloss retention. High resistance to wear and washes. Non-yellowing.

    Fields of Application
    In- and outdoor use, for the protection of wooden surfaces such as teak, pinewood or fibreboard, in marine environments and over the waterline

  • TECHNICAL INFO

    DRYING:3 - 4 hours
    APPLICATION METHODS: Air Spray-gun, Roller, Brush
    Finish:Gloss

  • NSTRUCTIONS FOR USE

    The surface has to be sanded, clean, dry and free from salt (wash it). Do not varnish either with direct sunlight or with dew.

    BARE SURFACES: Thin the first coat with 20 - 30% TITAN YATE Thinner.

    Hard wood, teak, iroko, or tropical wood: Thoroughly wash the surface with TITAN YATE Thinner (to remove resin).Wait 24 hours to see if there is any resin exudation or delay in the varnish drying. If this is the case, wash again with TITAN YATE Thinner.

    Sand between coats. Finish with 2 - 3 unthinned coats of TITAN YATE Polyurethane Varnish.

    MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
    Thoroughly remove old varnish in poor condition. Sand to matt old but well adhered varnish and apply 2 - 3 unthinned coats of TITAN YATE Polyurethane + Acrylic Varnish.

    MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
    Thoroughly remove old varnish in poor condition by sanding, brushing or with TITAN Plus Paint-Stripper until obtaining a wooden surface in good condition. After that, proceed as for non-prepared surfaces.

  • HOW TO'S

  • COLOR LIST

Related products

CONTACT US

ASK us something...

Fill out the form below with your contact information, type your question and press "send". We will respond as soon as possible.