top

Titanlux Water-based outdoor Varnish TITAN

Code 12131
  • With U.V. ray filter
  • Tough and flexible
  • Waterproof
  • Contains anti-mould preservative

Delivery at your place

Order phone number 210 948 0035

Water-based hard-wearing varnish, special to protect and decorate wood outdoors. For weather-beaten wood surfaces in urban, rural and high mountain areas. With U.V. ray filter. Tough and flexible. Waterproof. It contains anti-mould preservative.

Fields of Application
High protection for wood outdoors, in cottages, bungalows, houses, etc.

DRYING:30 - 60 minutes
APPLICATION METHODS: Brush, roller and spray-gun
Finish:Satin/Gloss

Thoroughly stir the contents in the pack and apply by thin coats, on smooth (sanded), clean and dry surfaces, thinning if necessary. Lightly sand between coats to achieve a perfect finish.

Tropical or resinous wood: Please refer to the Technical Service.

BARE SURFACES:
Indoors:Apply 2 - 3 coats.

Outdoors: For improving the protection, previously prime the wood with one coat of TITANXYL Water-Based Lasur Undercoat.

Let to dry for 24 hours and finish with 3 coats of TITANLUX Water-Based Outdoor Varnish.

MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
Wash, lightly sand and directly apply the varnish.

MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
If they are in poor condition or waxed, remove old varnish coats completely and proceed as for bare surfaces.

  • DESCRIPTION

    Water-based hard-wearing varnish, special to protect and decorate wood outdoors. For weather-beaten wood surfaces in urban, rural and high mountain areas. With U.V. ray filter. Tough and flexible. Waterproof. It contains anti-mould preservative.

    Fields of Application
    High protection for wood outdoors, in cottages, bungalows, houses, etc.

  • TECHNICAL INFO

    DRYING:30 - 60 minutes
    APPLICATION METHODS: Brush, roller and spray-gun
    Finish:Satin/Gloss

  • NSTRUCTIONS FOR USE

    Thoroughly stir the contents in the pack and apply by thin coats, on smooth (sanded), clean and dry surfaces, thinning if necessary. Lightly sand between coats to achieve a perfect finish.

    Tropical or resinous wood: Please refer to the Technical Service.

    BARE SURFACES:
    Indoors:Apply 2 - 3 coats.

    Outdoors: For improving the protection, previously prime the wood with one coat of TITANXYL Water-Based Lasur Undercoat.

    Let to dry for 24 hours and finish with 3 coats of TITANLUX Water-Based Outdoor Varnish.

    MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
    Wash, lightly sand and directly apply the varnish.

    MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
    If they are in poor condition or waxed, remove old varnish coats completely and proceed as for bare surfaces.

  • HOW TO'S

  • COLOR LIST

Related products

CONTACT US

ASK us something...

Fill out the form below with your contact information, type your question and press "send". We will respond as soon as possible.