top

Titanlux Synthetic Enamel Silver Gloss TITAN

Code 120529802
  • Multi-purpose synthetic enamel
  • Gloss, hard-wearing and elastic
  • Excellent resistance to weathering
  • High reflecting performance

Delivery at your place

Order phone number 210 948 0035

Quick-drying, multi-purpose synthetic enamel. Gloss, hard-wearing and elastic. Excellent resistance to weathering. High reflecting performance.
Once dry and when rubbing, this enamel has some degree of smudging.

Fields of Application

 

For indoor and outdoor use. To protect and embellish doors, furniture, industrial vehicles, machinery, etc.

 


 

DRYING:3 - 4 hours
APPLICATION METHODS: Brush, roller and spray-gun
PRESENTATION:4 l, 750 ml, 375 ml, 125 ml and 50 ml.
FINISH:Gloss

GENERAL REMARKS:
Stir well before using.
The surfaces to be painted have to be clean, dry and suitably primed.
Remove all existing rests of dirt, grease, poorly adhered rust and previous coatings by using thinner or paint stripper, depending on requirements.
In order to obtain a better finish, application by spray-gun is recommended. If applied by brush or by roller, if there is too much brushing or rolling, the final finish can get stripped, greyish or tarnished. However, this does not affect the protective performance of the product. Once dry and when rubbing, this enamel has some degree of smudging.

BARE SURFACES:
Wood: Sand wood following the wood grain, thoroughly clean, remove all resins or resin secretion on the surface and smooth up sharp edges. Apply TITAN Sealing-Primer or Multi-Purpose Primer depending on requirements.

Iron and steel: TITANLUX Synthetic Rust-Preventive Primer or TITAN Multi-Purpose Primer. For outdoorsurfaces, at least two coats of the selected primer will be needed. For indoor surfaces, one coat will be enough.

In all cases for:
Indoor surfaces: Finish with 1 or 2 coats of TITANLUX Synthetic Enamel
Outdoor surfaces: Finish with 2 or 3 coats of TITANLUX Synthetic Enamel.
MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
Wash, lightly sand and directly apply TITANLUX Synthetic Enamel.
MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
Completely remove all previous paint coats and proceed as for bare surfaces.
 

  • DESCRIPTION

    Quick-drying, multi-purpose synthetic enamel. Gloss, hard-wearing and elastic. Excellent resistance to weathering. High reflecting performance.
    Once dry and when rubbing, this enamel has some degree of smudging.

    Fields of Application

     

    For indoor and outdoor use. To protect and embellish doors, furniture, industrial vehicles, machinery, etc.

     


     

  • TECHNICAL INFO

    DRYING:3 - 4 hours
    APPLICATION METHODS: Brush, roller and spray-gun
    PRESENTATION:4 l, 750 ml, 375 ml, 125 ml and 50 ml.
    FINISH:Gloss

  • NSTRUCTIONS FOR USE

    GENERAL REMARKS:
    Stir well before using.
    The surfaces to be painted have to be clean, dry and suitably primed.
    Remove all existing rests of dirt, grease, poorly adhered rust and previous coatings by using thinner or paint stripper, depending on requirements.
    In order to obtain a better finish, application by spray-gun is recommended. If applied by brush or by roller, if there is too much brushing or rolling, the final finish can get stripped, greyish or tarnished. However, this does not affect the protective performance of the product. Once dry and when rubbing, this enamel has some degree of smudging.

    BARE SURFACES:
    Wood: Sand wood following the wood grain, thoroughly clean, remove all resins or resin secretion on the surface and smooth up sharp edges. Apply TITAN Sealing-Primer or Multi-Purpose Primer depending on requirements.

    Iron and steel: TITANLUX Synthetic Rust-Preventive Primer or TITAN Multi-Purpose Primer. For outdoorsurfaces, at least two coats of the selected primer will be needed. For indoor surfaces, one coat will be enough.

    In all cases for:
    Indoor surfaces: Finish with 1 or 2 coats of TITANLUX Synthetic Enamel
    Outdoor surfaces: Finish with 2 or 3 coats of TITANLUX Synthetic Enamel.
    MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
    Wash, lightly sand and directly apply TITANLUX Synthetic Enamel.
    MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
    Completely remove all previous paint coats and proceed as for bare surfaces.
     

  • HOW TO'S

  • COLOR LIST

Related products

CONTACT US

ASK us something...

Fill out the form below with your contact information, type your question and press "send". We will respond as soon as possible.