Yacht Paint Poliurethane TITAN YATE
- It dries by oxidation
- Very easy to apply
- Perfect levelling
- Long life
- High gloss
- Very tough and resistant to marine environments, rubbing, grease and petroleum
Delivery at your place
Order phone number 210 008 5999
Single component gloss enamel. It dries by oxidation. Very easy to apply. Perfect levelling. Long life. High gloss. Very tough and resistant to marine environments, rubbing, grease and petroleum.
Fields of Application
Outdoor and indoor use. For the decoration and protection of surfaces in marine environments: machine rooms, cabins, decks, ship sides, superstructures, etc.
DRYING:4 - 6 hours
APPLICATION METHODS: Brush, roller and spray-gun
Finish:Gloss
Carefully stir the contents in the pack before use. The surface has to be sanded, clean, dry and salt-free (wash it). Do not paint if the surface is under direct sunlight or if it has dew on it.
BARE SURFACES:
Wood: Superstructure: Apply 1 - 2 coats of TITAN Sealing Primer, TITAN Multi-Purpose Primer or TITAN YATE Epoxy Primer. Finish with TITAN YATE Urethane-Based Enamel
Iron: Superstructure: Apply 1 coat of TITAN YATE Epoxy Primer, thinned with 20% TITAN YATE Thinner. After 24 hours, apply 2 coats of TITAN YATE M-150 Epoxy Primer. By 72 hours, finish with TITAN YATE Urethane-Based Enamel.
In both cases, for indoor surfaces, 2 coats of TITAN YATE Urethane-Based Enamel are enough. For outdoor surfaces, 3 coats are required
MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
Wash, sand and directly apply the Enamel.
MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
Thoroughly remove all previous coats and afterwards proceed as for a bare surface.
-
DESCRIPTION
Single component gloss enamel. It dries by oxidation. Very easy to apply. Perfect levelling. Long life. High gloss. Very tough and resistant to marine environments, rubbing, grease and petroleum.
Fields of Application
Outdoor and indoor use. For the decoration and protection of surfaces in marine environments: machine rooms, cabins, decks, ship sides, superstructures, etc. -
TECHNICAL INFO
DRYING:4 - 6 hours
APPLICATION METHODS: Brush, roller and spray-gun
Finish:Gloss -
NSTRUCTIONS FOR USE
Carefully stir the contents in the pack before use. The surface has to be sanded, clean, dry and salt-free (wash it). Do not paint if the surface is under direct sunlight or if it has dew on it.
BARE SURFACES:
Wood: Superstructure: Apply 1 - 2 coats of TITAN Sealing Primer, TITAN Multi-Purpose Primer or TITAN YATE Epoxy Primer. Finish with TITAN YATE Urethane-Based EnamelIron: Superstructure: Apply 1 coat of TITAN YATE Epoxy Primer, thinned with 20% TITAN YATE Thinner. After 24 hours, apply 2 coats of TITAN YATE M-150 Epoxy Primer. By 72 hours, finish with TITAN YATE Urethane-Based Enamel.
In both cases, for indoor surfaces, 2 coats of TITAN YATE Urethane-Based Enamel are enough. For outdoor surfaces, 3 coats are required
MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
Wash, sand and directly apply the Enamel.MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
Thoroughly remove all previous coats and afterwards proceed as for a bare surface. - HOW TO'S
- COLOR LIST