Propellers' Antifouling Titan Yate
- Free from cuprous oxide
- It contains Hostaflon®
- Suitable for any kind of surface
Delivery at your place
Order phone number 210 008 5999
Hard antifouling. It is free from cuprous oxide. It contains Hostaflon®. Suitable for any kind of surface, including suitably primed aluminium alloys and zinc-plated metals.
DRYING:15 minutes. Immersion (boat-launching): after 12 hours and up to 6 months.
APPLICATION METHODS: Brush, Spray-gun
PRESENTATION:250 ml.
FINISH: Matt
Carefully stir the contents in the pack. The surfaces have to be clean, dry and salt-free (wash them). Do not paint under direct sunlight or with dew.
In areas of higher wear, such as waterline, keel, rudder, etc., an additional coats is recommended since water turbulence speeds up self-polishing.New metallic surfaces:
BARE SURFACES:
Metal surfaces: Remove any grease or oil with TITAN YATE Thinner. Apply 1 coat of TITAN YATE Propeller Primer or Epoxy Primer; finish with two coats of TITAN YATE Propeller Antifouling.
MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
Lightly sand, remove grease and apply two coats of TITAN YATE Propeller Antifouling.
MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
Thoroughly remove old coats with TITAN Plus Paint-Stripper or with TITAN YATE Water-based Antifouling Stripper.
-
DESCRIPTION
Hard antifouling. It is free from cuprous oxide. It contains Hostaflon®. Suitable for any kind of surface, including suitably primed aluminium alloys and zinc-plated metals.
-
TECHNICAL INFO
DRYING:15 minutes. Immersion (boat-launching): after 12 hours and up to 6 months.
APPLICATION METHODS: Brush, Spray-gun
PRESENTATION:250 ml.
FINISH: Matt -
NSTRUCTIONS FOR USE
Carefully stir the contents in the pack. The surfaces have to be clean, dry and salt-free (wash them). Do not paint under direct sunlight or with dew.
In areas of higher wear, such as waterline, keel, rudder, etc., an additional coats is recommended since water turbulence speeds up self-polishing.New metallic surfaces:BARE SURFACES:
Metal surfaces: Remove any grease or oil with TITAN YATE Thinner. Apply 1 coat of TITAN YATE Propeller Primer or Epoxy Primer; finish with two coats of TITAN YATE Propeller Antifouling.
MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
Lightly sand, remove grease and apply two coats of TITAN YATE Propeller Antifouling.MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
Thoroughly remove old coats with TITAN Plus Paint-Stripper or with TITAN YATE Water-based Antifouling Stripper. - HOW TO'S
- COLOR LIST