Ablative Vinyl Anti-fouling Paint TITAN YATE
- As an antifouling on any kind of submerged surfaces.
Delivery at your place
Order phone number 210 008 5999
Tough and adhesive product, with a high antifouling performance. It quickly dries by solvent evaporation. It keeps the hull free from marine growth for longer and helps the boat to reach maximum speed.
DRYING:20 - 25 minutes / Immersion (Launching): after 12 hours and up to 6 months
APPLICATION METHODS: Brush, Roller.
Finish:Matt
Carefully stir the contents in the can before use. The surface has to be sanded, clean, dry and salt-free (wash it). Do not paint if the surface is under direct sunlight or if it has dew on it. In areas of higher wear, such as waterline, keel, rudder, etc., it is recommended an additional coat, since water turbulence
speeds up self-polishing.
BARE SURFACES:
Polyester: Degrease with TITAN YATE Thinner and apply 2 coats of TITAN YATE Epoxy Primer in intervals of 24 hours (For
osmosis prevention, apply M-150 Epoxy Primer).
Metal: Apply 1 coat of TITAN YATE Epoxy Primer. After 24 hours, apply 3-4 coats of TITAN YATE M-150 Epoxy Primer, strictly
following the instructions of the pack.
Wood: Apply 2 coats of TITAN YATE Epoxy Primer, the 1st coat thinned with 20% TITAN YATE Thinner.
In all cases, finish with two coats of TITAN YATE Antifouling.
MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
Wash with fresh water jet and directly apply 2 coats of TITAN YATE Self-Polishing Antifouling. If the previous coats are not vinyl- based, thoroughly remove them with TITAN Paint Stripper or TITAN YATE Water-Based Paint Stripper. Wash with fresh water and afterwards proceed as for a bare surface.
MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
Thoroughly remove all previous coats with TITAN Paint Stripper or TITAN YATE Water-Based Paint Stripper. Wash with fresh water and afterwards proceed as for a bare surface.
-
DESCRIPTION
Tough and adhesive product, with a high antifouling performance. It quickly dries by solvent evaporation. It keeps the hull free from marine growth for longer and helps the boat to reach maximum speed.
-
TECHNICAL INFO
DRYING:20 - 25 minutes / Immersion (Launching): after 12 hours and up to 6 months
APPLICATION METHODS: Brush, Roller.
Finish:Matt -
NSTRUCTIONS FOR USE
Carefully stir the contents in the can before use. The surface has to be sanded, clean, dry and salt-free (wash it). Do not paint if the surface is under direct sunlight or if it has dew on it. In areas of higher wear, such as waterline, keel, rudder, etc., it is recommended an additional coat, since water turbulence
speeds up self-polishing.BARE SURFACES:
Polyester: Degrease with TITAN YATE Thinner and apply 2 coats of TITAN YATE Epoxy Primer in intervals of 24 hours (For
osmosis prevention, apply M-150 Epoxy Primer).Metal: Apply 1 coat of TITAN YATE Epoxy Primer. After 24 hours, apply 3-4 coats of TITAN YATE M-150 Epoxy Primer, strictly
following the instructions of the pack.Wood: Apply 2 coats of TITAN YATE Epoxy Primer, the 1st coat thinned with 20% TITAN YATE Thinner.
In all cases, finish with two coats of TITAN YATE Antifouling.
MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
Wash with fresh water jet and directly apply 2 coats of TITAN YATE Self-Polishing Antifouling. If the previous coats are not vinyl- based, thoroughly remove them with TITAN Paint Stripper or TITAN YATE Water-Based Paint Stripper. Wash with fresh water and afterwards proceed as for a bare surface.MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
Thoroughly remove all previous coats with TITAN Paint Stripper or TITAN YATE Water-Based Paint Stripper. Wash with fresh water and afterwards proceed as for a bare surface. - HOW TO'S
- COLOR LIST