top

Remover for Anti-fouling Water based TITAN YATE

Code 54419
  • Special paint stripper for easily and quickly removing antifouling paints on surfaces which were suitably primed with epoxy primers.
  • Only for professional use
  •  Especially suitable for polyester hulls because it does not damage the gel-coat

 

Delivery at your place

Order phone number 210 008 5999

Water based remover for antifouling paints, quick and easy. It is an easy to apply gel with high perfomance that allows removing old antifoulings without blasting. It does not damage the gelcoat, the protection for osmosis or two component primers. Suitable for metallic, wooden or fiberglass surface.

 

Directions of use:

STEP 1: Apply a thick layer of Decapante over old antifouling layers and wait for 2 hours.

STEP 2: Apply a second layer and let it act for 24 hours

STEP 3: Wash with fresh water. The remover will wash away old antifouling layers

STEP 4: Wash thoroughly the surface, allow it to dry and then proceed in applying the new antifoulingIt can remove up to 8 layers of old antifoulings

Apply a thick coat and wait for 4 - 5 hours approximately. Apply a second coat and allow the paint stripper to soften old
antifouling coats for 12 - 18 hours. Wash with water jet until all old coats get stripped off. If necessary, repeat this same
procedure again.
Protect the gel-coat of non-submerged surfaces, because the paint stripper can decrease its gloss (It does not act on enamels
and two component primers).
Do not use this product on areas where there can be unprimed met

  • DESCRIPTION

    Water based remover for antifouling paints, quick and easy. It is an easy to apply gel with high perfomance that allows removing old antifoulings without blasting. It does not damage the gelcoat, the protection for osmosis or two component primers. Suitable for metallic, wooden or fiberglass surface.

     

  • TECHNICAL INFO

  • NSTRUCTIONS FOR USE

    Directions of use:

    STEP 1: Apply a thick layer of Decapante over old antifouling layers and wait for 2 hours.

    STEP 2: Apply a second layer and let it act for 24 hours

    STEP 3: Wash with fresh water. The remover will wash away old antifouling layers

    STEP 4: Wash thoroughly the surface, allow it to dry and then proceed in applying the new antifoulingIt can remove up to 8 layers of old antifoulings

    Apply a thick coat and wait for 4 - 5 hours approximately. Apply a second coat and allow the paint stripper to soften old
    antifouling coats for 12 - 18 hours. Wash with water jet until all old coats get stripped off. If necessary, repeat this same
    procedure again.
    Protect the gel-coat of non-submerged surfaces, because the paint stripper can decrease its gloss (It does not act on enamels
    and two component primers).
    Do not use this product on areas where there can be unprimed met

  • HOW TO'S

  • COLOR LIST

Related products

CONTACT US

ASK us something...

Fill out the form below with your contact information, type your question and press "send". We will respond as soon as possible.