top

Synthetic Primer 807 TITAN

Code 14161
  • For metallic structures, machinery, pipes, outside of tanks, elements of locksmith’s craft, etc

Delivery at your place

Order phone number 210 948 0035

 It is a modified matt synthetic quick drying primer.

Fields of Application
Suitable as a general use shop primer on iron and steel for moderately corrosive atmospheres, where especially short overcoating intervals are needed. For metallic structures, machinery, pipes, outside of tanks, elements of locksmith’s craft, etc..

DRYING:15 - 30 minutes
APPLICATION METHODS: Brush (Only for patching), Air Spray-Gun (The data quoted are only hints), Airless (The data quoted are only hints)
Finish:Matt

Carefully stir the product in the can. The surfaces to be painted have to be clean, dry and sound.

BARE SURFACES:

Steel: Remove rust by sandblasting up to Sa 2 ½ grade of the ISO 8501-1 standard  or by means of manual or mechanical cleaning, up to ST3 grade of this same standard. Degrease, dust off and remove rests of rust. Apply the required number of coatings to reach the recommended thickness level. Then apply the coats of finishing product, according to instructions.


MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
For poorly adhered systems and/or showing rust, remove them by sandblasting up to Sa 2 ½ grade of the ISO 8501-2 standard or by means of manual or mechanical cleaning, up to ST3 grade of this same standard. Patch with this primer, preferably by brush. Apply a whole coat of this primer and then the finishing product, according to specifications. If there is a large poorly adhered surface, thoroughly remove old coats and proceed as for bare surfaces

  • DESCRIPTION

     It is a modified matt synthetic quick drying primer.

    Fields of Application
    Suitable as a general use shop primer on iron and steel for moderately corrosive atmospheres, where especially short overcoating intervals are needed. For metallic structures, machinery, pipes, outside of tanks, elements of locksmith’s craft, etc..

  • TECHNICAL INFO

    DRYING:15 - 30 minutes
    APPLICATION METHODS: Brush (Only for patching), Air Spray-Gun (The data quoted are only hints), Airless (The data quoted are only hints)
    Finish:Matt

  • NSTRUCTIONS FOR USE

    Carefully stir the product in the can. The surfaces to be painted have to be clean, dry and sound.

    BARE SURFACES:

    Steel: Remove rust by sandblasting up to Sa 2 ½ grade of the ISO 8501-1 standard  or by means of manual or mechanical cleaning, up to ST3 grade of this same standard. Degrease, dust off and remove rests of rust. Apply the required number of coatings to reach the recommended thickness level. Then apply the coats of finishing product, according to instructions.


    MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
    For poorly adhered systems and/or showing rust, remove them by sandblasting up to Sa 2 ½ grade of the ISO 8501-2 standard or by means of manual or mechanical cleaning, up to ST3 grade of this same standard. Patch with this primer, preferably by brush. Apply a whole coat of this primer and then the finishing product, according to specifications. If there is a large poorly adhered surface, thoroughly remove old coats and proceed as for bare surfaces

  • HOW TO'S

  • COLOR LIST

Related products

CONTACT US

ASK us something...

Fill out the form below with your contact information, type your question and press "send". We will respond as soon as possible.