top

Titanxyl Water-based Lasur Undercoat

Code 271
  • Excellent undercoat
  • Natural rustic-looking finishes
  • Perfect protection

Delivery at your place

Order phone number 210 948 0035

Impregnating preparation to protect wood submitte to intermitent moisture (outdoor timber). Prevention against rottening and bluing fungi, a well as against wood worms and termites.

Excellent undercoat for finishing with TITANXYL COLOUR, achieving natural rustic-looking finishes, with perfect protection.

For the protection of windows, doors, beams, banisters and overhangs in wood protection and maintenance jobs in general.

Composition : 0.48% Permethrine, 0.92% Propiconazol, 0.53% IPBC,  100% solvent naphtha light and other excipients c.s.p

DRYING:1 - 2 hours
APPLICATION METHODS: Brush
 

Carefully stir in the pack. The woods to be treated have to be clean, dry and free from any previous coat of varnish or paint in order to achieve their suitable impregnation with TITANXYL Lasur Undercoat. The wood moisture content must not exceed 12% in hard wood and 15% in soft wood.

Painted or varnished wood: Remove the existing coats entirely with TITAN Plus Paint Stripper and proceed as on new wood, after thoroughly cleaning away all traces of the Paint Stripper with solvents.

BARE SURFACES:
Directly  apply  1  or  2  consecutive  coats  of  TITANXYL  Lasur  Undercoat.  Finish  with  TITANXYL  Lasur  Colour,  varnish  or paint, depending on requirements.

Old unpainted wood: It is essential to entirely remove the dried out, greyed surface by sanding or surfacing thoroughly until the wood in good condition is exposed. Then treat like bare wood.

Resinous and tropical wood: Drying can be difficult. Clean the wooden surface with TITAN YATE Thinner. Apply one coat of TITANXYL Lasur Undercoat on a small area. Check if there is resin exudation. If this is the case, please refer to the Technical Service. If there is no exudation, finish with TITANXYL Lasur Colour, varnish or paint, depending on requirements.

  • DESCRIPTION

    Impregnating preparation to protect wood submitte to intermitent moisture (outdoor timber). Prevention against rottening and bluing fungi, a well as against wood worms and termites.

    Excellent undercoat for finishing with TITANXYL COLOUR, achieving natural rustic-looking finishes, with perfect protection.

    For the protection of windows, doors, beams, banisters and overhangs in wood protection and maintenance jobs in general.

    Composition : 0.48% Permethrine, 0.92% Propiconazol, 0.53% IPBC,  100% solvent naphtha light and other excipients c.s.p

  • TECHNICAL INFO

    DRYING:1 - 2 hours
    APPLICATION METHODS: Brush
     

  • NSTRUCTIONS FOR USE

    Carefully stir in the pack. The woods to be treated have to be clean, dry and free from any previous coat of varnish or paint in order to achieve their suitable impregnation with TITANXYL Lasur Undercoat. The wood moisture content must not exceed 12% in hard wood and 15% in soft wood.

    Painted or varnished wood: Remove the existing coats entirely with TITAN Plus Paint Stripper and proceed as on new wood, after thoroughly cleaning away all traces of the Paint Stripper with solvents.

    BARE SURFACES:
    Directly  apply  1  or  2  consecutive  coats  of  TITANXYL  Lasur  Undercoat.  Finish  with  TITANXYL  Lasur  Colour,  varnish  or paint, depending on requirements.

    Old unpainted wood: It is essential to entirely remove the dried out, greyed surface by sanding or surfacing thoroughly until the wood in good condition is exposed. Then treat like bare wood.

    Resinous and tropical wood: Drying can be difficult. Clean the wooden surface with TITAN YATE Thinner. Apply one coat of TITANXYL Lasur Undercoat on a small area. Check if there is resin exudation. If this is the case, please refer to the Technical Service. If there is no exudation, finish with TITANXYL Lasur Colour, varnish or paint, depending on requirements.

  • HOW TO'S

  • COLOR LIST

Related products

CONTACT US

ASK us something...

Fill out the form below with your contact information, type your question and press "send". We will respond as soon as possible.