Excellent adhesion and flexibility, great refilling capacity, without contraction when drying. Non-sagging. Easy application and good extensibility. Water resistant.

Fields of Application
To even and refill irregularities in steel, wood, polyester, aluminium and fibre glass surfaces, to be painted in any kind of boats, surf boards, etc

DRYING:8 - 10 Kg/l
APPLICATION METHODS: Putty knife
Finish:Matt

The surfaces have to be sanded, clean, dry and salt-free (previously wash them). Do not use the filler in direct sunlight or with dew. Thoroughly mix 2 parts in volume of BASE with 1 part of HARDENER. A uniformly greyish filler will be obtained. Apply the mixture immediately because it thickens after 1 hour.

BARE SURFACES:
Apply with putty knife. It may be overcoated after 8 - 12 hours (depending on temperature) with prior sanding. Sanding is easier before 48 hours.

MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
Clean and sand the surface. Apply the filler with a putty-knife.

MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
Thoroughly remove previous coats and proceed as for bare surfaces.