Quick-drying rust preventive primer. It contains zinc phosphate and a combination of highly waterproof resins.

Fields of Application
It is a primer with good adhesion on a wide variety of surfaces, such as iron, aluminium, stainless steel, copper, bronze, tin, wood and polyester. In come cases, such as stainless surfaces, it may be necessary to sand the surface in order to open pore. It is recommended as a protective primer for submerged surfaces

 

DRYING:1 - 2 hours
APPLICATION METHODS: Brush, roller and spray-gun
Finish:Satin

Carefully stir the contents in the can. The surfaces have to be clean, dry and degreased. Always paint at a temperature 3ºC above dew point.

BARE SURFACES:
Bare surfaces: Polyester. Thoroughly degrease with TITAN YATE Thinner. Lightly sand, dust-off and apply 1 coat of Marine Primer.

Wood: Apply one or two coats of Marine Primer on dry and sanded surfaces.

Iron: Remove rust, grease and dirt. Once dry, apply two coats of Marine Primer.

Submerged iron: Previously consult your dealer.

Non-ferrous metals: Degrease and get the surface dry. Apply 1 coat of Marine Primer. When priming stainless steel, previously sand, depending on its characteristics, in order to improve adhesion.

MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
Thoroughly remove old coats with TITAN Plus Paint Stripper. Wash with fresh water and proceed as for non-prepared surfaces.