top
Titanlux Acrylic Enamel TITAN
IN MANY COLORS
WHERE TO FIND IT

Titanlux Acrylic Enamel TITAN

Code 12040
  • Easy-to-apply
  • Good levelling
  • Wear resistant
  • Non-yellowing
  • Gloss

Delivery at your place

Order phone number 210 948 0035

Water-based acrylic enamel. Easy-to-apply. Good levelling. Wear resistant. It contains TITAN's Silcurane exclusive ingredient. Wash resistant. Odourless. Non-yellowing.

Indoor and outdoor use. Suitable for wood, plaster, iron and masonry. Also for doors, windows, walls, heating elements,  furniture, toys, etc. . To be used at home, schools, hospitals, hotels, etc.

 

DRYING:30 - 60 minutes
APPLICATION METHODS: Brush, roller and spray-gun
PRESENTATION:4 l, 2.5 l, 750 ml, 375 ml and 125 ml
FINISH:Gloss

Coverage: 12 - 14.5 m2/l
Drying at 23ºC 60 % RH: 30 - 60 minutes
Recoat time at 23ºC 60% HR: 6 - 8 hours
Fields of Application: Brush, roller and spray-gun
Thinner: Water

GENERAL REMARKS:
Thoroughly stir the contents in the can. The surfaces to be painted have to be clean, dry and suitably primed. Remove all existing rests of dirt, grease, poorly adhered rust and previous coatings by using thinner or paint stripper, depending on requirements.

BARE SURFACES:

Wood: Sand following the wood grain, thoroughly clean the surface, remove all resins or resin secretion and smooth up sharp edges. Apply a base-coat of TITANXYL Water Based Lasur Undercoat or TITAN Sealing-Primer depending on requirements.

Iron: TITAN Water Based Multi Purpose Primer. For outdoor surfaces, at least two coats of primer will be needed. For indoor surfaces, one coat will be enough.

In all cases for:
Indoor surfaces: Finish with 1 or 2 full coats of TITANLUX Acrylic Enamel. Avoid excess brushing or rolling.
Outdoor surfaces: Finish with 2 or 3 coats of TITANLUX Acrylic Enamel. Avoid excess brushing or rolling.
MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
Wash, lightly sand and directly apply 1 or 2 coats of TITANLUX Acrylic Enamel.
MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
Completely remove all previous coats and proceed as for bare surfaces.
 

  • DESCRIPTION

    Water-based acrylic enamel. Easy-to-apply. Good levelling. Wear resistant. It contains TITAN's Silcurane exclusive ingredient. Wash resistant. Odourless. Non-yellowing.

    Indoor and outdoor use. Suitable for wood, plaster, iron and masonry. Also for doors, windows, walls, heating elements,  furniture, toys, etc. . To be used at home, schools, hospitals, hotels, etc.

     

  • TECHNICAL INFO

    DRYING:30 - 60 minutes
    APPLICATION METHODS: Brush, roller and spray-gun
    PRESENTATION:4 l, 2.5 l, 750 ml, 375 ml and 125 ml
    FINISH:Gloss

  • NSTRUCTIONS FOR USE

    Coverage: 12 - 14.5 m2/l
    Drying at 23ºC 60 % RH: 30 - 60 minutes
    Recoat time at 23ºC 60% HR: 6 - 8 hours
    Fields of Application: Brush, roller and spray-gun
    Thinner: Water

    GENERAL REMARKS:
    Thoroughly stir the contents in the can. The surfaces to be painted have to be clean, dry and suitably primed. Remove all existing rests of dirt, grease, poorly adhered rust and previous coatings by using thinner or paint stripper, depending on requirements.

    BARE SURFACES:

    Wood: Sand following the wood grain, thoroughly clean the surface, remove all resins or resin secretion and smooth up sharp edges. Apply a base-coat of TITANXYL Water Based Lasur Undercoat or TITAN Sealing-Primer depending on requirements.

    Iron: TITAN Water Based Multi Purpose Primer. For outdoor surfaces, at least two coats of primer will be needed. For indoor surfaces, one coat will be enough.

    In all cases for:
    Indoor surfaces: Finish with 1 or 2 full coats of TITANLUX Acrylic Enamel. Avoid excess brushing or rolling.
    Outdoor surfaces: Finish with 2 or 3 coats of TITANLUX Acrylic Enamel. Avoid excess brushing or rolling.
    MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
    Wash, lightly sand and directly apply 1 or 2 coats of TITANLUX Acrylic Enamel.
    MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
    Completely remove all previous coats and proceed as for bare surfaces.
     

  • HOW TO'S

  • COLOR LIST

Related products

CONTACT US

ASK us something...

Fill out the form below with your contact information, type your question and press "send". We will respond as soon as possible.