top
TITAN Tile Enamel for Bathrooms and Kitchens
IN MANY COLORS
WHERE TO FIND IT

TITAN Tile Enamel for Bathrooms and Kitchens

Code 12061
  • Very hard and resistant to abrasion, scratches, soap and stains of liquor, juice, oil, etc.
  • Very wash resistant
  • Easy to use

Delivery at your place

Order phone number 210 948 0035

Satin, easy-to-apply, synthetic enamel. To obtain high quality and soft touch finishes. Very hard and resistant to abrasion, scratches, soap and stains of liquor, juice, oil, etc. Very wash resistant. Unsuitable for immersion or areas with condensation.

 

DRYING:4 - 5 hours
APPLICATION METHODS: Brush and Roller
PRESENTATION:750 ml.

GENERAL REMARKS:
Carefully clean and degrease the surface with soap and water before painting. Avoid using cleaning products made out of silicone or wax. Allow drying thoroughly.
To ensure better adhesion, joints would have to be rubbed with a brush in order to remove any dirt, moth, grease, etc.. After that, dry the surface with a clean piece of cloth. Stir the product in the pack and apply a thin coat. If the painting surface is deeply coloured, a second coat is recommended. Pay special attention to joints and cornes. Seal these areas with silicone to avoid damp impregnation.

5 days after painting, the surface can be washed with soft detergent. Do not use abrasive products, scourers or brushes, because they could scratch the enamelled surface. If the temperature of the surface is below 10ºC and if paint coat is thick, the overcoating time has to be longer. Check that the surface is suitably dry before overcoating

IMPORTANT: It reaches its final satin appearance after 3 days approx. depending on environmental temperature (it contains less solvent).

 

  • DESCRIPTION

    Satin, easy-to-apply, synthetic enamel. To obtain high quality and soft touch finishes. Very hard and resistant to abrasion, scratches, soap and stains of liquor, juice, oil, etc. Very wash resistant. Unsuitable for immersion or areas with condensation.

     

  • TECHNICAL INFO

    DRYING:4 - 5 hours
    APPLICATION METHODS: Brush and Roller
    PRESENTATION:750 ml.

  • NSTRUCTIONS FOR USE

    GENERAL REMARKS:
    Carefully clean and degrease the surface with soap and water before painting. Avoid using cleaning products made out of silicone or wax. Allow drying thoroughly.
    To ensure better adhesion, joints would have to be rubbed with a brush in order to remove any dirt, moth, grease, etc.. After that, dry the surface with a clean piece of cloth. Stir the product in the pack and apply a thin coat. If the painting surface is deeply coloured, a second coat is recommended. Pay special attention to joints and cornes. Seal these areas with silicone to avoid damp impregnation.

    5 days after painting, the surface can be washed with soft detergent. Do not use abrasive products, scourers or brushes, because they could scratch the enamelled surface. If the temperature of the surface is below 10ºC and if paint coat is thick, the overcoating time has to be longer. Check that the surface is suitably dry before overcoating

    IMPORTANT: It reaches its final satin appearance after 3 days approx. depending on environmental temperature (it contains less solvent).

     

  • HOW TO'S

  • COLOR LIST

Related products

CONTACT US

ASK us something...

Fill out the form below with your contact information, type your question and press "send". We will respond as soon as possible.