Aspecto Ceramico by Titan is the best solution for proper restoration of bathtubs and other ceramic surface in bathrooms and kitchens.This special bi-component enamel offers excellent adhesion to ceramic surfaces (tiles, bathtubs, sinks) creating a high strength coating resistent in frequent use, washing, and washing etc.Thanks to its formulation, Aspecto Ceramico is non yellowing. Can be applied on interior and exterior surfaces in sanitary and elsewhere. Easy to apply. Aspecto Ceramico is also suitable for application on other surface  within kitchen i.e. fridges, washing machines and other electrical appliances) and wood surfaces, melamine, iron, cement, aluminum, etc. Suitably primed.

 

Finish: Gloss & Satin
Colours: White & tinting colors
Coverage: 14-18sq/L
Drying time: 4-6 hours
Application: Brush/ Roller
Thinning/cleaning equipment: TITAN YATE Diluyente
Packing: 750 ml

GENERAL REMARKS:
Thoroughly stir the contents in the can.The surfaces have to be clean, dry and suitably prepared. Remove any rest of dirt, grease, poorly adhered rust or old coats by using thinner or paint-stripper, depending on needs.

BARE SURFACES:
Wood:Sand the wood following the wood grain. Clean the surface, remove resin or resin secretion and smooth too sharp edges. Apply TITAN Protector, Sealing Primer, Multi-Usage Primer, or TITAN YATE Epoxy Primer, depending on needs.

Iron and steel: After having washed the surface and removed rust, apply TITAN Multi-Purpose Primer or TITAN YATE Epoxy Primer, depending on needs.

For outdoor surfaces, at least two coats of the selected primer will be needed. For indoor surfaces, one coat will be enough.

Tile and non ferrous metals: Sand and degrease. Apply TITAN Multi-Purpose Primer or TITAN YATE Epoxy Primer, depending on needs.

In all cases for:
Indoor surfaces: Finish with 1 or 2 coats of TITANLUX Ceramic-Like Finish Enamel.
Outdoor surfaces: Finish with 2 or 3 coats of TITANLUX Ceramic-Like Finish Enamel.

MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
If required, repair the surface with TITAN YATE Epoxy Filler. Wash, lightly sand and directly apply 1 or 2 coats of TITANLUX Ceramic-Like Finish Enamel.
In bathtubs: Wait at least 72 hours from the last coat, before using them.

MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
Completely remove all previous paint coats and proceed as for bare surfaces.