top

Polyester Filler 2 Components TITAN YATE

Code 54146
  • Especially suitable for quick works
  • Excellent adhesion on metal sheet
  • High refilling and levelling power
  • Thixotropic

Delivery at your place

Order phone number 210 948 0035

Polyester filler. Especially suitable for quick works. Excellent adhesion on metal sheet. High refilling and levelling power. Thixotropic. Easy application in areas that are hard to reach.

Fields of Application
To even and refill irregularities of the surfaces to be painted, both metallic or made of polyester. Especially suitable for super- structures.

DRYING:5 - 10 minutes
APPLICATION METHODS: Putty knife
Finish:Matt

The surfaces have to be sanded, clean, dry and salt-free (previously wash them). Do not use the filler in direct sunlight or with dew. Only  when  going  to  be  used,  mix  the  required  amount  of  Filler  with  2  -  3%  Hardener.  Apply  the  mixture immediately (application must be made within 5 - 8 minutes, depending on amount and room temperature). It is advisable to dry sand polyester filler because moisture inside the filler while watersanding may cause problems in the surface and in the finish.

Do not apply on thermoplastic finishes and Wash Primer.

BARE SURFACES:
Apply with putty knife. It may be overcoated after 30 minutes with prior sanding.

MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
Clean and sand the surface. Directly apply the filler with a putty-knife.

MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
Thoroughly remove previous coats and proceed as for bare surfaces.

  • DESCRIPTION

    Polyester filler. Especially suitable for quick works. Excellent adhesion on metal sheet. High refilling and levelling power. Thixotropic. Easy application in areas that are hard to reach.

    Fields of Application
    To even and refill irregularities of the surfaces to be painted, both metallic or made of polyester. Especially suitable for super- structures.

  • TECHNICAL INFO

    DRYING:5 - 10 minutes
    APPLICATION METHODS: Putty knife
    Finish:Matt

  • NSTRUCTIONS FOR USE

    The surfaces have to be sanded, clean, dry and salt-free (previously wash them). Do not use the filler in direct sunlight or with dew. Only  when  going  to  be  used,  mix  the  required  amount  of  Filler  with  2  -  3%  Hardener.  Apply  the  mixture immediately (application must be made within 5 - 8 minutes, depending on amount and room temperature). It is advisable to dry sand polyester filler because moisture inside the filler while watersanding may cause problems in the surface and in the finish.

    Do not apply on thermoplastic finishes and Wash Primer.

    BARE SURFACES:
    Apply with putty knife. It may be overcoated after 30 minutes with prior sanding.

    MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
    Clean and sand the surface. Directly apply the filler with a putty-knife.

    MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
    Thoroughly remove previous coats and proceed as for bare surfaces.

  • HOW TO'S

  • COLOR LIST

Related products

CONTACT US

ASK us something...

Fill out the form below with your contact information, type your question and press "send". We will respond as soon as possible.