top
Titanxyl Lasur Colour Satin
IN MANY COLORS
10 YEARS PROTECTION WHERE TO FIND IT

Titanxyl Lasur Colour Satin

Code 12256
  • Breathable and microproous
  • Water-repellent
  • Quick-drying
  • High resistance to weathering and sun ray damage
     

Delivery at your place

Order phone number 210 948 0035

It is the ideal treatment for the comprehensive protection of wood. Water-repellent, quick-drying, high resistance to weathering and sun ray damage. It contains UV filters.
Intermixable and transparent colours that do not mask the wood natural appearance and enhance its beauty.

Breathable and microproous. It allows the passage of water vapour between the inside and outside of the wood and protect it from flaking and cracking. No sanding is required for maintenance. Very low odour.

Fields of Application
Ideal for conferring beauty and protection on windows, doors, beams, banisters, overhangs and, generally speaking, on all kinds of wood structures, in joinery work, etc.

DRYING:4 - 8 hours
APPLICATION METHODS: Brush
Finish:Satin

Carefully stir the contents in the can. The woods to be treated have to be clean, dry and free from any previous coat of varnish or paint.
The wood moisture content must not exceed 20%. A smoother finish may be obtained by running a cloth or dry brush along the graining 15-30 minutes after application.

Resinous or tropical wood: Please seek advice.from the Technical Service.

BARE SURFACES:
Sand the wood following the wood grain. Clean the surface, remove resin or resin secretion and smooth too sharp edges.

Indoors: One coat of TITANXYL Lasur Undercoat plus 1 coat of TITANXYL Lasur Colour of the required shade. Greater contrast is obtained and the wood grain is more highlighted by applying 2 coats of TITANXYL Lasur Colour. If the wood is not highly polished or is very absorbent and a finer, smoother finish is wanted, apply a top coat of Clear TITANXYL Lasur, after light surface sanding of the final coat of TITANXYL Lasur Colour.

Outdoors: One coat of TITANXYL Total Protection and 2 - 3 coats of TITANXYL Lasur Colour of the required shade, satin or matt finish. Darker shades are obtained with more coats of the same colour applied. In order to avoid too dark final shades, once the required shade is obtained, for further coats it is it is advisable to choose a lighter colour among the range of TITANXYL Lasur Colour. When exposed to weathering do not treat wood only with Clear TITANXYL.

MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
Maintenance of lasur-coated wood: Remove dust and apply TITANXYL Lasur Colour, satin or matt. If you want to avoid too deep shades, choose a lighter colour among the range. Carry out maintenance when you begin to see bare wood, owing to the self-controlled wear effect of TITANXYL. If too much time has been allowed to pass, there may be large patches of surface without colour and the wood may begin to look dried out. If this is the case, even out the colour with sandpaper and treat as a new surface.

MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
It is essential to entirely remove the dried out, greyed surface by sanding or surfacing thoroughly until the wood in good condition is exposed. Then treat like new wood.

  • DESCRIPTION

    It is the ideal treatment for the comprehensive protection of wood. Water-repellent, quick-drying, high resistance to weathering and sun ray damage. It contains UV filters.
    Intermixable and transparent colours that do not mask the wood natural appearance and enhance its beauty.

    Breathable and microproous. It allows the passage of water vapour between the inside and outside of the wood and protect it from flaking and cracking. No sanding is required for maintenance. Very low odour.

    Fields of Application
    Ideal for conferring beauty and protection on windows, doors, beams, banisters, overhangs and, generally speaking, on all kinds of wood structures, in joinery work, etc.

  • TECHNICAL INFO

    DRYING:4 - 8 hours
    APPLICATION METHODS: Brush
    Finish:Satin

  • NSTRUCTIONS FOR USE

    Carefully stir the contents in the can. The woods to be treated have to be clean, dry and free from any previous coat of varnish or paint.
    The wood moisture content must not exceed 20%. A smoother finish may be obtained by running a cloth or dry brush along the graining 15-30 minutes after application.

    Resinous or tropical wood: Please seek advice.from the Technical Service.

    BARE SURFACES:
    Sand the wood following the wood grain. Clean the surface, remove resin or resin secretion and smooth too sharp edges.

    Indoors: One coat of TITANXYL Lasur Undercoat plus 1 coat of TITANXYL Lasur Colour of the required shade. Greater contrast is obtained and the wood grain is more highlighted by applying 2 coats of TITANXYL Lasur Colour. If the wood is not highly polished or is very absorbent and a finer, smoother finish is wanted, apply a top coat of Clear TITANXYL Lasur, after light surface sanding of the final coat of TITANXYL Lasur Colour.

    Outdoors: One coat of TITANXYL Total Protection and 2 - 3 coats of TITANXYL Lasur Colour of the required shade, satin or matt finish. Darker shades are obtained with more coats of the same colour applied. In order to avoid too dark final shades, once the required shade is obtained, for further coats it is it is advisable to choose a lighter colour among the range of TITANXYL Lasur Colour. When exposed to weathering do not treat wood only with Clear TITANXYL.

    MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
    Maintenance of lasur-coated wood: Remove dust and apply TITANXYL Lasur Colour, satin or matt. If you want to avoid too deep shades, choose a lighter colour among the range. Carry out maintenance when you begin to see bare wood, owing to the self-controlled wear effect of TITANXYL. If too much time has been allowed to pass, there may be large patches of surface without colour and the wood may begin to look dried out. If this is the case, even out the colour with sandpaper and treat as a new surface.

    MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
    It is essential to entirely remove the dried out, greyed surface by sanding or surfacing thoroughly until the wood in good condition is exposed. Then treat like new wood.

  • HOW TO'S

  • COLOR LIST

Titanxyl Lasur Colour Satin

Related products

CONTACT US

ASK us something...

Fill out the form below with your contact information, type your question and press "send". We will respond as soon as possible.