top
Titanlak Polyurethane Enamel Satin TITAN
IN MANY COLORS
WHERE TO FIND IT

Titanlak Polyurethane Enamel Satin TITAN

Code 242
  • Easy application
  • Quality, fine, soft-feel satin finishes
  • Excellent lacquered look
  • Highly wash-resistant

Delivery at your place

Order phone number 210 948 0035

Synthetic enamel. Based on high solids technology. Specially for lacquering and enamelling. Easy application, producing premium quality, fine, soft-feel satin finishes with an excellent lacquered look. Great resistance to wearing, scratching, soaps, liqueur, juice and oil stains. Highly wash-resistant.


Fields of Application:
For indoor and outdoor use. For protecting and decorating all kinds of wood and metal surfaces (such as furniture, shelves,
doors, windows and radiators)

DRYING:4 - 5 hours
APPLICATION METHODS: Brush, roller and spray-gun
PRESENTATION:4 l, 2.5 l (only in white), 750 ml, 375 ml and 125 ml.
FINISH:Satin

Coverage: 12 - 14 m2/l
Drying at 23ºC 60 % RH: 4 - 5 hours
Recoat time at 23ºC 60% HR: 18 - 24 hours
Fields of Application: Brush, roller and spray-gun
Equipment Cleaning: Synthetics and Grease Thinner, Odourless Thinner or White Spirit.


GENERAL REMARKS:
Stir well before using.The surfaces to be painted have to be clean, dry and suitably primed. Remove all existing rests of dirt, grease, poorly adhered rust and previous coatings by using thinner or paint stripper, depending on requirements.

High-solids paints leave a thicker dry film. They must not be applied at thicknesses in excess of the data recommended in order
to avoid problems of drying and surface appearance. If it is required to modify the satin grade of our TITANLAK Enamel, we advise to mix it with TITANLUX Matt Enamel of Gloss Enamel, depending on needs.

For outdoor application, we do not recommend any mixtures with TITANLUX Matt Enamel. If the temperature of the surface is below 10ºC and if paint coat is thick, the overcoating time has to be longer. Check that the surface is suitably dry before overcoating.

IMPORTANT: It reaches its final satin appearance after 3 days approx. depending on environmental temperature (it contains less solvent).
If white is applied on heating radiators, it may yellow depending on the temperature reached by the coated item.

In all cases for:
Indoor surfaces: Finish with 1 or 2 coats of TITANLAK Polyurethane Enamel
Outdoor surfaces: Finish with 2 or 3 coats of TITANLAK Polyurethane Enamel.
BARE SURFACES:
Wood:Sand wood following the wood grain, thoroughly clean, remove all resins or resin secretion on the surface and smooth up sharp edges. Apply TITAN Protector, Sealing-Primer or Multi-Purpose Primer depending on requirements.

Iron: TITANLUX Synthetic Rust-Preventive Primer, TITAN Electrolytic Red Lead or Multi-Purpose Primer. For outdoor surfaces, at
least two coats of the selected primer will be needed. For indoor surfaces, one coat will be enough.

Other surfaces: Please consult your dealer.

MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
Wash, lightly sand and directly apply 1 or 2 coats of TITANLAK Polyurethane Enamel.
MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
Completely remove all previous paint coats and proceed as for bare surfaces

  • DESCRIPTION

    Synthetic enamel. Based on high solids technology. Specially for lacquering and enamelling. Easy application, producing premium quality, fine, soft-feel satin finishes with an excellent lacquered look. Great resistance to wearing, scratching, soaps, liqueur, juice and oil stains. Highly wash-resistant.


    Fields of Application:
    For indoor and outdoor use. For protecting and decorating all kinds of wood and metal surfaces (such as furniture, shelves,
    doors, windows and radiators)

  • TECHNICAL INFO

    DRYING:4 - 5 hours
    APPLICATION METHODS: Brush, roller and spray-gun
    PRESENTATION:4 l, 2.5 l (only in white), 750 ml, 375 ml and 125 ml.
    FINISH:Satin

  • NSTRUCTIONS FOR USE

    Coverage: 12 - 14 m2/l
    Drying at 23ºC 60 % RH: 4 - 5 hours
    Recoat time at 23ºC 60% HR: 18 - 24 hours
    Fields of Application: Brush, roller and spray-gun
    Equipment Cleaning: Synthetics and Grease Thinner, Odourless Thinner or White Spirit.


    GENERAL REMARKS:
    Stir well before using.The surfaces to be painted have to be clean, dry and suitably primed. Remove all existing rests of dirt, grease, poorly adhered rust and previous coatings by using thinner or paint stripper, depending on requirements.

    High-solids paints leave a thicker dry film. They must not be applied at thicknesses in excess of the data recommended in order
    to avoid problems of drying and surface appearance. If it is required to modify the satin grade of our TITANLAK Enamel, we advise to mix it with TITANLUX Matt Enamel of Gloss Enamel, depending on needs.

    For outdoor application, we do not recommend any mixtures with TITANLUX Matt Enamel. If the temperature of the surface is below 10ºC and if paint coat is thick, the overcoating time has to be longer. Check that the surface is suitably dry before overcoating.

    IMPORTANT: It reaches its final satin appearance after 3 days approx. depending on environmental temperature (it contains less solvent).
    If white is applied on heating radiators, it may yellow depending on the temperature reached by the coated item.

    In all cases for:
    Indoor surfaces: Finish with 1 or 2 coats of TITANLAK Polyurethane Enamel
    Outdoor surfaces: Finish with 2 or 3 coats of TITANLAK Polyurethane Enamel.
    BARE SURFACES:
    Wood:Sand wood following the wood grain, thoroughly clean, remove all resins or resin secretion on the surface and smooth up sharp edges. Apply TITAN Protector, Sealing-Primer or Multi-Purpose Primer depending on requirements.

    Iron: TITANLUX Synthetic Rust-Preventive Primer, TITAN Electrolytic Red Lead or Multi-Purpose Primer. For outdoor surfaces, at
    least two coats of the selected primer will be needed. For indoor surfaces, one coat will be enough.

    Other surfaces: Please consult your dealer.

    MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
    Wash, lightly sand and directly apply 1 or 2 coats of TITANLAK Polyurethane Enamel.
    MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
    Completely remove all previous paint coats and proceed as for bare surfaces

  • HOW TO'S

  • COLOR LIST

Related products

CONTACT US

ASK us something...

Fill out the form below with your contact information, type your question and press "send". We will respond as soon as possible.