top

Propellers' Antifouling Titan Yate

Code 54311
  • Free from cuprous oxide
  • It contains Hostaflon®
  • Suitable for any kind of surface

Delivery at your place

Order phone number 210 948 0035

Hard antifouling. It is free from cuprous oxide. It contains Hostaflon®. Suitable for any kind of surface, including suitably primed aluminium alloys and zinc-plated metals.


 

DRYING:15 minutes. Immersion (boat-launching): after 12 hours and up to 6 months.
APPLICATION METHODS: Brush, Spray-gun
PRESENTATION:250 ml.
FINISH: Matt

Carefully stir the contents in the pack. The surfaces have to be clean, dry and salt-free (wash them). Do not paint under direct sunlight or with dew.
In areas of higher wear, such as waterline, keel, rudder, etc., an additional coats is recommended since water turbulence speeds up self-polishing.New metallic surfaces:

BARE SURFACES:
Metal surfaces: Remove any grease or oil with TITAN YATE Thinner. Apply 1 coat of TITAN YATE Propeller Primer or Epoxy Primer; finish with two coats of TITAN YATE Propeller Antifouling.

MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
Lightly sand, remove grease and apply two coats of TITAN YATE Propeller Antifouling.

MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
Thoroughly remove old coats with TITAN Plus Paint-Stripper or with TITAN YATE Water-based Antifouling Stripper.

  • DESCRIPTION

    Hard antifouling. It is free from cuprous oxide. It contains Hostaflon®. Suitable for any kind of surface, including suitably primed aluminium alloys and zinc-plated metals.


     

  • TECHNICAL INFO

    DRYING:15 minutes. Immersion (boat-launching): after 12 hours and up to 6 months.
    APPLICATION METHODS: Brush, Spray-gun
    PRESENTATION:250 ml.
    FINISH: Matt

  • NSTRUCTIONS FOR USE

    Carefully stir the contents in the pack. The surfaces have to be clean, dry and salt-free (wash them). Do not paint under direct sunlight or with dew.
    In areas of higher wear, such as waterline, keel, rudder, etc., an additional coats is recommended since water turbulence speeds up self-polishing.New metallic surfaces:

    BARE SURFACES:
    Metal surfaces: Remove any grease or oil with TITAN YATE Thinner. Apply 1 coat of TITAN YATE Propeller Primer or Epoxy Primer; finish with two coats of TITAN YATE Propeller Antifouling.

    MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
    Lightly sand, remove grease and apply two coats of TITAN YATE Propeller Antifouling.

    MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
    Thoroughly remove old coats with TITAN Plus Paint-Stripper or with TITAN YATE Water-based Antifouling Stripper.

  • HOW TO'S

  • COLOR LIST

Propellers' Antifouling Titan Yate

Related products

CONTACT US

ASK us something...

Fill out the form below with your contact information, type your question and press "send". We will respond as soon as possible.